Vertical motion test tables

TASSER_VIDER_Tables_de_test-2

The acceleration applied to the product that has to be tested is unidirectional and vertical.
These tables allow variable frequencies to be generated in defined ranges:

  • 10 to 16,6 Hz amplitude up to 15mm
  • 15 to 25 Hz, amplitude up to 10 mm.
  • 35 to 50 Hz, amplitude up to 1 mm.
  • For other frequencies and amplitudes, please contact us.

The amplitude remains constant and independent of the vibration frequency.

Strong, steel or stainless steel construction of various qualities. These tables are equipped with electrical cabinet with frequency drive.

Tables de tests à excitation circulaire – NF EN/ISO 2247

TASSER_VIDER_Tables_de_test-3

This acceleration applied to the product that has to be tested is bidirectional horizontal and vertical. These jolting tables are designed to fulfill the NF EN/ISO 2247 standard. They allow variable frequencies to be generated ranging from 1 to 10 Hz. The amplitude remains constant and independent of the vibration frequency. The trajectory is circular in a vertical plane, the table always remains horizontal.

Strong, steel or stainless steel construction of various qualities. These tables are equipped with electrical cabinet enable to diversify the frequency. Possibility to propose other path shapes of non plane displacement.

Optional : They can be equipped with automatisms which allow motion cycles to be programmed, by adjusting the frequency ranges and operation times which thus simulate pre-defined process.

It is possible to have wooden contact surface which simulate vehicle floors.
Tying down points, and modular wedging surfaces.

DOWNLOAD PDF FILE